看不到FLASH请下载FLASH PLAYER,点这里下载
看不到FLASH请下载FLASH PLAYER,点击 这里下载
 
>> Chemical Equipments
>> Steel Building Material
>> Steel Building Machine
>> Steel Structure Building
 
Hydraulic Decoiler System
Components
The decoiler consists of the coil car, decoiler, lead rail, and hydraulic system.
 
Parameters
For moving dolly
Capacity:                Max.10tons
Speed:                   6m/min
Lifting:                   Max. 550mm
Moving:                  Max. 3000mm
For uncoiler
Capacity:                 Max. 10tons
Inner Dia:                about 508mm;
 610mm(gasket is required)
Width:                    Max.1500mm
Center adjust:            Max. 250mm
For hydraulic
Max. hydraulic pressure: 16Mpa
Motor power:            10.5kw
Air pressure:             0.9Mpa
 
Work Flow
Fix coil to coil car → coil car move to decoiler → coil car lift to the same center with decoiler → coil car move into the decoiler → fix the coil to the decoiler→ coil car return → axis of decoiler rotate
 
 
 
 
Roller
Roll stands
The rollers are made of quality carbon steel with digital-controlled procession and coated with chrome.or made of bearing steel or mould steel with hard treatment.
Control box
Control components
Press
Cutter
The machines are controlled by PLC system.The operation is easy and can be chose operation manual or automatic.
The brands of the control components are Mitsubishi, Omron, Schneider
The press and the cutter are connected with the whole machine by bolts and rotoblasted on the surface. They press or cut the panel by the tank moving up-and-down .
 
 
Decoilers


Automatic Stacker
Component and Function
It consists of automatic stacker, run out conveyor.
It is used to transport the product to the pointed position.
 
Stacker’s Specification
Product’s length:  2-12m
Stacker width:     as per the finished sheets
Max weight:       1000kg(3000kg for conveyor)
Motor power:      2.25kw
Conveyor width:   914 or 1250mm
Automatic Stacker: to stacker the finished sheets, then move out.

 
 
浙ICP备10008890号-1